Dimming speed is slow! The steps for dimming are cumbersome! There are safety hazards in dimming... Are you still using traditional laser tubes? I don’t allow you not to know that TR series laser tubes: have the functions of red light preview and red light positioning, saying goodbye to slow and tedious light path adjustment; using coaxial red light patented technology, there is no need for the laser tube to emit laser, only red light This enables precise positioning of the optical path.
【TR series co2 laser tube】
After years of market verification, the SPT TR series CO2 laser tubes have gained a large number of loyal fans, especially "newbies" who have little experience in debugging the optical path of laser machines. They all praise its function of solving dimming pain points.
They said that the visible red light greatly reduces the obstacles caused by the invisibility of the CO2 laser itself to the laser light path debugging, helping them to accurately visually inspect the laser transmission path, making the light path adjustment more accurate and convenient, and also reducing the time required to adjust the laser light path. The risk of being burned by the CO2 laser greatly improves operational safety.
When adjusting the light path of a traditional laser tube, it is generally necessary to continuously repeat the following steps:
First adjust the 1# reflector and the 2# reflector; put a mark on the tape of the 2# reflector until the centers of the two marks coincide; then move the laser head to the nearest and farthest sides from the 2# reflector respectively. Put a mark on the tape of the 3# reflector until the centers of the two marks coincide; finally, put the tape on the light entrance of the focusing barrel of the 3# reflector and mark it. If the mark is in the center of the tape, the light path adjustment is completed, otherwise it will continue to be debugged repeatedly. (For detailed steps, please refer to: Just a few steps to teach you how to install the laser tube correctly (graphic version))
[Dimming steps]
This process usually requires repeated debugging, and it generally takes an experienced master a long time to complete the optical path adjustment.
[Dimming comparison]
In order to solve the long-standing problem of dimming, the TR series laser tube creatively adds a coaxial red light indicating device. The red light module is designed to be powered by a separate 5V DC power supply, which can also be obtained from the existing laser power supply or control card. powered by. Each TR series laser tube can make the "laser" visible without additional settings; the light path can be accurately adjusted without the need for the laser tube to emit laser light; the dimming can be accurately positioned, no longer blindly looking for a spot, allowing novices to adjust the light Become a master in seconds.
[Red light indicating device]
The use of TR series laser tubes for optical path adjustment greatly improves work efficiency. The dimming operation is simplified into the following 3 steps:
The first step is to adjust the Y-axis light path: stick the masking paper on the #2 reflector frame and make a mark at the same point as the red light. Adjust the adjusting screw on the #1 reflector frame until there is no deviation between the red light and the marked point.
[Y-axis adjustment]
The second step is to adjust the X-axis light path: Make a mark on the textured paper at the same point as the red light. Adjust the adjusting screw on the reflector frame to make the red light coincide with the mark point again. Until there is no deviation between the red light and the marked point.
[X-axis adjustment]
The third step is to adjust the Z-axis optical path: use textured paper to make a dot mark. Move the wooden board to make the mark coincide with the center of the laser nozzle, and adjust the adjusting screw on the #3 reflector frame to make the red light coincide with the mark point.
[Z-axis adjustment]
After the above three simple steps, the optical path adjustment of the TR series laser tube is completed! Not only that, TR series laser tubes also have multiple core advantages:
TR series laser tubes have four core advantages:
1. Protect the laser tube: Under harsh environmental conditions, the beam combiner in the red light emitter will effectively protect the laser tube window mirror from the risk of breakdown;
[Protect laser tube window mirror]
2. Thanks to the new generation of coaxial red light patented technology, during the process of laser lens correction of the optical path, the transmission path of the laser can be accurately visually measured, which is more accurate and convenient;
[Accurate visual inspection of the laser transmission path]
3. During the laser processing process, it has red light preview and positioning functions, providing more accurate "center-like" positioning;
[Precise "center-like" positioning]
4. During the operation, only the red light is needed to correct the optical path, and there is no need for the laser tube to emit laser, making the operation faster and safer.
[Quick and safe operation]
The application fields of SPT TR series CO2 laser tubes are also very wide, including laser marking, laser engraving, laser cutting, laser medical treatment, laser scientific research and other fields.
In the future, we will continue to develop and manufacture high-stability CO2 lasers according to market demand, so that SPT lasers can be used in more different fields.
